DOWNLOADS

FOR THE LATEST FIRMWARE, CLICK ON THE RADIO IMAGE
GO TO BOTTOM OF THE PAGE AND CLICK ON RELATED FILES

this a Paid for RTSYSTEMS memory file for VARIOUS YAESU C4FM RADIO'S may not work on the free version
ALL FUSION UK + Air/Marine bands and Raynet may need updating...

 

YAESU HOME BASE

YAESU FT-991 C4FM CAPABLE BUT WIRES-X ANALOGUE ONLY, NO DIGITAL CONNECTION. BANDSCOPE NO SOUND WHEN ACTIVATED. 160M-70cm ALL MODE ALL BAND EXCEPT 4m  HAS WIRES-X CAPABLE FEATURES

YAESU FT-991A C4FM CAPABLE BUT WIRES-X ANALOGUE ONLY, NO DIGITAL CONNECTION. LIVE BANDSCOPE WITH SOUND WHEN ACTIVATED. 160M-70cm ALL MODE ALL BAND EXCEPT 4m  HAS WIRES-X CAPABLE FEATURES

YAESU MOBILE

FTM-100DR VHF/UHF SINGLE RECEIVER DUAL MODE ANALOGUE AND C4FM HAS DUAL WATCH WITH GPS & APRS  HAS WIRES-X CAPABLE FEATURES

FTM-400DE VHF/UHF DUAL RECEIVER DUAL MODE ANALOGUE AND C4FM  WITH GPS & APRS TOP VFO (A) IS DIGITAL & ANALOGUE & HAS WIRES-X CAPABLE FEATURES ...... BOTTOM VFO IS ANALOGUE ONLY  & HAS NO WIRES-X CAPABLE FEATURES

FTM-3200DE VHF ONLY.... DIGITAL & ANALOGUE 65W NO GPS or APRS OR WIRES-X NAVIGATION BUT WILL CONNECT VIA A WIRES-X ENABLED REPEATER OR GATEWAY TO ANYWHERE THEY ARE CONNECTED

HANDHELD

FT-70DE/DR

FT-70DE UHF/VHF DIGITAL & ANALOGUE  NO GPS or APRS OR WIRES-X NAVIGATION BUT WILL CONNECT VIA A WIRES-X ENABLED REPEATER OR GATEWAY TO ANYWHERE THEY ARE CONNECTED

FT-1D

COMPACT RUGGED LITTLE HANDY HAS WIRES-X FEATURES

FT-2D

COMPACT RUGGED LITTLE HANDY HAS WIRES-X FEATURES AND A TOUCH SCREEN

HRI-200 (WIRES-X BOX)

THE HRI-200 WHEN ATTACHED TO A YAESU (FM OR C4FM) RADIO CREATE'S A NODE RADIO. THIS TAKES WHAT IT HEARS THROUGH RF AND TRANSFERS IT TO THE INTERNET AND VISA VERSA. A SECOND RADIO (TALKTHROUGH) THEN ALLOWS YOU TO TX/RX TO THE NODE VIA RF...........

Other Digital equipment

DR-1X

THE REPEATER IS ESSENTIALLY 2 X FTM400 RADIOS WHICH ALLOW KEEPERS TO CONFIGURE THE REPEATER TO DO AMS IN/OUT, FIXED IN/OUT(FM orC4FM) or AMS IN -FIXED OUT IT CAN ALSO CONNECT TO WIRES-X USING THE HRI-200 OR VIA AN RF LINK............

DR-2X

The repeater controller, receiver and transmitter are all packaged into a 19” standard cabinet rack mount panel unit for simple replacement of an existing repeater. Existing peripheral devices such as the duplexer and amplifier, etc., can continue to be used as-is.